How much is LEGO Axl's Tower Carrier (70322-1) worth?

Axl's Tower Carrier sells for an average of $36.86 used and $85.16 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70322-1?

This set includes 3 minifigures: Ash Attacker - Orange Horns ($3.04), Axl - Flat Silver Visor and Torso ($4.36), Axl Bot - Bright Light Orange Shoulders, Flat Silver Helmet ($2.28). The minifigures have a combined BrickLink value of $11.97. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Axl's Tower Carrier?

The minifigures make up about 32% of the set value ($11.97 out of $36.86). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Axl's Tower Carrier (70322-1) retired?

Yes, Axl's Tower Carrier was released in 2016 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Axl's Tower Carrier set is complete?

Use the parts list on this page to check every piece and all 3 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Axl's Tower Carrier

70322-1·Nexo Knights·2016·3 minifigs·257 parts

Used Avg

$36.86

New Avg

$85.16

Add to your inventory Scan the minifigs

About Axl's Tower Carrier

Axl's Tower Carrier (70322-1) is a LEGO Nexo Knights set released in 2016, currently averaging $36.86 used on BrickLink. It comes with 3 minifigures worth a combined $11.97. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 257 pieces.

Parts (257)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

×2

Brick, Modified 1 x 2 with Studs on 1 Side

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

×4

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Slope, Curved 2 x 1 x 2/3

×4

Slope, Curved 2 x 1 x 2/3

×4

Wedge 2 x 2 (Slope 45 Corner)

×2

Brick, Modified Facet 4 x 4

×2

Plate, Modified 1 x 2 with Tow Ball on Side

×5

Plate, Modified 1 x 2 with Small Tow Ball Socket on End

Plate, Modified 1 x 2 with Tow Ball and Small Tow Ball Socket on Ends

×4

Plate, Modified 1 x 2 with Small Tow Ball Socket on Side

×3

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Tile, Round 2 x 2 with Bottom Stud Holder with Orange and Yellow Cross Pattern

×3

Tile, Round 2 x 2 with Bottom Stud Holder with Globlin Face with Small Teeth Pattern

×2

Tile, Round 2 x 2 with Bottom Stud Holder with Globlin Face with 2 Jagged Teeth and 1 Fang Pattern

Appendage Bony Small with Bar End (Leg / Rib / Tail)

Tile, Modified 1 x 2 with 2 Teeth Vertical

×5

Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top

×2

Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×3

Tile, Modified 1 x 1 with Open O Clip

×4

Projectile Launcher, 1 x 4 with Inside Clips (Disk Shooter)

Technic, Axle 2L with Pin with Friction Ridges

×2

Technic, Liftarm Thick 1 x 1 (Spacer)

×10

Bracket 3 x 2 x 1 1/3 with Bottom Tube

×6

Dish 6 x 6 Inverted with Bar Handle

Plate, Round Corner 2 x 6 Double

×2

Tile, Modified 2 x 3 Pentagonal

×4

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Incinerate

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Force Field

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Stone Stun

Tile, Modified 2 x 3 Pentagonal with Nexo Power Shield Pattern - Rock Throw

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×8

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×11

Slope 45 1 x 1 x 2/3 Quadruple Convex Pyramid

×3

Wedge 4 x 4 Pointed

×2

Wedge 4 x 4 Pointed

Minifigure, Weapon Axe Head with Bar

×2

Minifigure, Shield Pentagonal with Grooved Edges

Minifigure, Weapon Blade with Bars and 5 Spikes

Minifigure, Utensil Book Cover with Gold Circle with Spikes, White Eye, Dark Blue Highlights Pattern (Nexo Knights Book of Fear)

Tile, Modified 1 x 2 Grille with Bottom Groove

×3

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Large Figure Torso Armor Shoulder Studs with Black Spots and Orange Veins Pattern

Minifigure, Head, Modified Alien with Spikes on Top and Holes on Sides with White Pointed Teeth and Bright Light Orange Eyes Pattern (Burnzie)

Tile 1 x 4

×2

Tile, Modified 1 x 2 with Bar Handle

Minifigure, Utensil Book Binding with 2 Studs

Plate 2 x 12

×2

Brick 2 x 6

Wheel Hard Plastic Large (54mm D. x 30mm)

×6

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×4

Antenna Whip 8H

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×4

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

Technic Slope 6 x 1 x 1 2/3

×2

Technic, Pin with Short Friction Ridges

×7

Technic Engine Crankshaft Center

×2

Brick, Modified 1 x 2 with Grille / Fluted Profile

×2

Brick, Modified 2 x 2 with Pins and Axle Hole

×5

Brick 2 x 4

×2

Brick 2 x 2

Brick 1 x 2

×4

Brick 1 x 1

×4

Brick 1 x 8

×4

Brick 1 x 4

×2

Brick, Modified 1 x 2 with Log Profile

×5

Brick, Modified 1 x 4 with Log Profile

Plate 2 x 4

Plate 2 x 3

×4

Plate 2 x 3

×4

Plate 2 x 3

Plate 2 x 2

×2

Plate 2 x 2

×3

Plate 2 x 2

×2

Plate 1 x 2

×7

Plate 1 x 2

×8

Plate 1 x 2

×8

Plate 1 x 2

×2

Plate 1 x 2

×2

Plate 1 x 2

Brick, Modified 1 x 2 with Bar Handle on Side

Brick, Modified 1 x 2 with Open O Clip Thick (Vertical Grip)

×5

Plate 6 x 16

Plate 4 x 6

×2

Plate 2 x 8

×3

Plate 2 x 8

Plate 6 x 8

Bar 4L (Lightsaber Blade / Wand)

Wedge 2 x 16 Triple

×2

Slope 45 2 x 2

×2

Slope 45 2 x 2

Slope 45 2 x 2 with Silver Control Panel and Screen Pattern

Slope 45 2 x 1

×2

Wedge, Plate 4 x 4 Cut Corner

×2

Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End

×2

Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots

×2

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

×2

Brick, Round 1 x 1

×4

Tile 2 x 2

×2

Tile 2 x 2

Tile 1 x 2 with Dark Tan Markings and Red Monster Minifigure Head with Yellow Eyes and Fangs Pattern (Nexo Knights Book of Fear)

Tile 1 x 1 with Bright Light Orange Bull on Dark Purple Pentagonal Shield Pattern

Technic, Brick 1 x 2 with Holes

Technic, Axle and Pin Connector Angled #5 - 112.5 degrees

×2

Technic, Brick 1 x 14 with Holes

×2

Technic, Axle and Pin Connector Angled #2 - 180 degrees

Technic, Pin 3L with Friction Ridges and Stop Bush

×4

Technic, Axle 2L Notched

×4

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Axle and Pin Connector Perpendicular Double

Technic, Liftarm Thick 1 x 5

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm Thick 1 x 3

×2

Technic, Liftarm Thick 1 x 7

Technic, Liftarm, Modified Bent Thick L-Shape 3 x 5

×2

Technic, Pin 3L without Friction Ridges

×2

Banana

×2

Brick 1 x 3

×4

Brick 1 x 3

×2

Plate 1 x 3

×10

Slope, Inverted 45 2 x 1

×2

Plate 1 x 6

×2

Technic, Pin without Friction Ridges

×3

Slope 65 2 x 2 x 2 with Bottom Tube

×2

Technic, Brick 1 x 2 with Hole

×2

Technic, Brick 1 x 2 with Hole

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 4 with Holes

×2

Technic, Axle 4L

Technic, Axle 6L

×3

Technic, Plate 2 x 4 with 3 Holes

Plate 1 x 4

×2

Plate 1 x 4

Technic Bush

×3

Technic, Plate 2 x 8 with 7 Holes

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

×2

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×2

Plate 2 x 6

×2

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

Minifigure, Utensil Axe

×2

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

×8

Technic, Brick 1 x 12 with Holes

×2

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

×2

Minifigure, Utensil Tool Spanner Wrench / Screwdriver

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×5

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 1 x 1

×7

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×5

Plate, Round 1 x 1

×8

Plate, Round 1 x 1

×6

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×2

Technic Bush 1/2 Smooth

×5

Technic, Pin 1/2 without Friction Ridges

×5

Slope 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×8

Wedge, Plate 3 x 2 Right

×4

Wedge, Plate 3 x 2 Left

×4

Hinge Plate 1 x 2 Locking with 1 Finger on Side (Undetermined Type)

×2

Hinge Plate 1 x 4 Locking Dual 1 Finger on Side

×2

Hinge Plate 3 x 4 Locking Dual 2 Fingers

×2

Bracket 1 x 2 - 2 x 2

×2

Plate 1 x 10

×2

Technic, Axle 3L

×2

Minifigure, Utensil Tool Mallet / Hammer

Wedge 4 x 4 x 2/3 Triple Curved

×2

Cone 1 x 1 with Top Groove

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Container, Treasure Chest Bottom with Slots in Back

Container, Treasure Chest Lid Curved with Thick Hinge

Dish 2 x 2 Inverted (Radar)

×6

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×5

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×5

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×2

Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

Wedge 4 x 4 Triple with Stud Notches

×4

Barb / Claw / Horn / Tooth - Small

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×3

Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes

Technic, Link Tread Wide with 2 Pin Holes

Technic Tread Sprocket Wheel Small

×2

Bar with Light Cover (Bulb) / Bionicle Barraki Eye

×2

Vehicle, Mudguard 2 x 4 with Arch Studded with Hole

×4

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

Plate, Modified 1 x 2 with Bar Handle on End

×4

Plate 1 x 12

×2

Plate, Modified 10 x 10 Octagonal with 6 x 6 Open Center

Castle Turret Top 4 x 8 x 2 1/3

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Technic, Panel Engine Block Half / Side Intake

Brick 1 x 10

Wheel Hard Plastic Small (22mm D. x 24mm)

×4

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

Slope 18 2 x 1 x 2/3 with Grille

×6

Turntable 4 x 4 Square Base, Locking

Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center

Tile 1 x 3

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×8

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×4

Minifigure, Plume Feather Triple Compact / Flame / Water with Small Pin

×4

Wedge 4 x 4 Fractured Polygon Top

×4

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

×3

Technic, Pin 3L with Friction Ridges

×6

Technic, Gearbox 4 x 4 x 1 2/3

Technic, Axle 3L with Stud

Technic, Gear 12 Tooth Bevel

×3

Technic, Liftarm Thin 1 x 3 - Axle Holes

×2

Tile 1 x 6

×3

Sticker Sheet for Set 70322 - International Version - (25093/6137240)

Windscreen 3 x 4 x 3

×3

Slope 30 1 x 2 x 2/3

×5

Tile 2 x 4

Technic, Axle 4L with Stop

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Brick, Modified Facet 2 x 2

×2

Brick, Modified Facet 2 x 2

×10

Brick, Modified Facet 2 x 2

×4

Plate, Modified 10 x 10 Octagonal with Hole

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Plate, Modified 1 x 4 with 2 Studs without Groove

×2

Bar 1L with Top Stud and 2 Side Studs (Connector Perpendicular)

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

Slope, Curved 4 x 1 x 2/3 Double

×2

Slope, Curved 4 x 1 x 2/3 Double

Minifigure, Weapon Pike / Spear - Handle with Flat End

Brick and Axle Separator

Tile, Round 1 x 1

×2

Arm Mechanical, Exo-Force / Bionicle, Thick Support

×3

Pneumatic Hose Connector with Axle Connector

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

×3

Bracket 1 x 2 - 2 x 2 Inverted

Bracket 1 x 2 - 1 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2 Inverted

×6

Bracket 1 x 2 - 1 x 2

×2

Flag 5 x 6 Hexagonal

Axl's Tower Carrier

About Axl's Tower Carrier

Part-out value

Seller notes

Minifigures in Axl's Tower Carrier (3)

Parts (257)

Common questions about Axl's Tower Carrier

How much is LEGO Axl's Tower Carrier (70322-1) worth?

What minifigures come in LEGO set 70322-1?

Is it worth parting out LEGO Axl's Tower Carrier?

Is LEGO Axl's Tower Carrier (70322-1) retired?

How do I check if my Axl's Tower Carrier set is complete?

More Nexo Knights sets

Explore more

Company

Legal