How much is LEGO Bug Obliterator (70705-1) worth?

Bug Obliterator sells for an average of $71.19 used and $89.46 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 70705-1?

This set includes 4 minifigures: Winged Mosquitoid ($15.48), Orange Robot Sidekick ($6.96), Jack Fireblade ($3.25), Ashlee Starstrider ($5.16). The minifigures have a combined BrickLink value of $30.85. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Bug Obliterator?

The minifigures make up about 43% of the set value ($30.85 out of $71.19). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Bug Obliterator (70705-1) retired?

Yes, Bug Obliterator was released in 2013 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Bug Obliterator set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Bug Obliterator

70705-1·Space·2013·4 minifigs·182 parts

Used Avg

$71.19

New Avg

$89.46

Add to your inventory Scan the minifigs

About Bug Obliterator

Bug Obliterator (70705-1) is a LEGO Space set released in 2013, currently averaging $71.19 used on BrickLink. It comes with 4 minifigures worth a combined $30.85. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 182 pieces.

Part-out value

Parts (182)

Tile, Modified 2 x 2 Inverted

×8

Brick, Modified 1 x 2 with Studs on 1 Side

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×4

Container, Faceted 4 x 4 x 3, Alien Pod Section

×2

Tail 4 x 1 x 3

×2

Brick 2 x 2 Corner

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×6

Tile, Modified 1 x 2 Grille with Bottom Groove

×11

Hinge Plate 1 x 4 Swivel (2429 / 2430)

×4

Tile 1 x 4

×13

Tile 1 x 4

×2

Tile, Modified 1 x 2 with Bar Handle

×2

Plate, Modified 2 x 2 with Pin Hole

×4

Minifigure, Visor Standard

×2

Brick 2 x 6

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Tile, Modified 1 x 1 with Clip

×8

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×17

Technic, Pin with Short Friction Ridges

×33

Brick 2 x 3

Minifigure, Utensil Space Scanner Tool

Brick, Modified 1 x 2 with Log Profile

Brick, Modified 1 x 4 with Log Profile

×2

Minifigure, Utensil Binoculars Town

×2

Plate 2 x 3

×3

Plate 1 x 2

×17

Plate 1 x 2

×3

Plate 4 x 4

Plate 4 x 6

×5

Plate 2 x 8

×2

Wedge, Plate 12 x 6 Left

×3

Wedge, Plate 12 x 6 Right

×3

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 3

×2

Slope 45 2 x 2 with Aircraft Green and Yellow Horizon Indicator, Controls, Black Buttons, Silver Slider and Switches Pattern

Hinge Plate 1 x 8 with Angled Side Extensions

×4

Panel 1 x 4 x 1

×2

Brick, Modified 1 x 4 with Studs on Side

×2

Brick, Modified 2 x 4 with Pin on Top and Side Cutouts

×2

Brick, Round 1 x 1

×8

Tile 2 x 2

Tile 1 x 2 with Red 82, Yellow and White Gauges Pattern

×2

Plate, Modified 2 x 3 with Hole

×4

Technic, Brick 1 x 2 with Holes

×12

Technic, Plate 2 x 6 with 5 Holes

×2

Technic, Axle and Pin Connector Angled #1

×3

Technic, Axle and Pin Connector Angled #3 - 157.5 degrees

×4

Technic, Brick 1 x 14 with Holes

×2

Technic, Pin 3L with Friction Ridges and Stop Bush

×2

Technic, Axle 2L Notched

×6

Technic, Brick 1 x 2 with Axle Hole

×4

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×2

Technic, Pin Double with Axle Hole

×2

Technic, Liftarm, Modified Bent Thick L-Shape 2 x 4

×4

Technic, Axle and Pin Connector Perpendicular 3L with Center Pin Hole

×2

Technic, Liftarm Thick 1 x 5

×2

Technic, Brick 4 x 4 Open Center

Technic, Liftarm Thick 1 x 7

×4

Technic, Brick 6 x 8 Open Center

×2

Slope 33 3 x 2

×7

Plate 1 x 8

×2

Brick 1 x 3

×4

Brick 1 x 3

×2

Plate 1 x 3

×4

Fence 1 x 4 x 1 Lattice

×2

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×12

Slope, Inverted 45 2 x 1

×2

Plate 1 x 6

Technic, Brick 1 x 4 with Holes

×2

Technic, Brick 1 x 8 with Holes

×2

Technic, Brick 1 x 16 with Holes

×2

Technic, Axle 6L

Technic, Axle 12L

Technic, Plate 2 x 4 with 3 Holes

×8

Technic, Plate 2 x 4 with 3 Holes

×2

Plate 1 x 4

×3

Plate 1 x 4

×2

Technic Bush

×3

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

×2

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×18

Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)

×9

Plate 2 x 6

×5

Technic, Brick 1 x 6 with Holes

×4

Dish 4 x 4 Inverted (Radar) with Solid Stud

Support 1 x 1 x 5 1/3 Spiral Staircase Axle

×8

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 2 x 2 with Axle Hole

×15

Dinosaur Tail / Neck Middle Section with Bar Hole and Technic Pin

Plate, Round 1 x 1

×9

Plate, Round 1 x 1

×10

Plate, Round 1 x 1

×4

Plate, Round 1 x 1

×9

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×10

Hinge Cylinder 1 x 3 Locking with 1 Finger and Pin with Round Hole and Friction Ridges on Ends

×4

Technic, Liftarm Thin 1 x 2 - Axle Holes

×2

Wedge 4 x 2 Right

Wedge 4 x 2 Left

Technic, Axle and Pin Connector Perpendicular 3L with 2 Pin Holes

×4

Technic, Axle 1L with Pin with Friction Ridges

×14

Wedge 4 x 2 Triple Left

Wedge 4 x 2 Triple Right

Wedge, Plate 3 x 2 Right

×3

Wedge, Plate 3 x 2 Left

×3

Technic, Liftarm Thick 1 x 2

×2

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on End

Bracket 1 x 2 - 2 x 2

×6

Technic, Axle 3L

Wedge 4 x 4 x 2/3 Triple Curved

Cone 1 x 1 with Top Groove

×10

Cone 1 x 1 with Top Groove

×16

Cone 1 x 1 with Top Groove

×2

Antenna Small Base with Black Lever (4592 / 4593)

×6

Brick, Modified 1 x 2 x 2/3 with Studs on Sides and Extended Stud Receptacle

×2

Cockpit 6 x 6 x 1 1/3 Cabin Base

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Wedge, Plate 12 x 3 Left

×2

Wedge, Plate 12 x 3 Right

×2

Dish 2 x 2 Inverted (Radar)

×3

Dish 2 x 2 Inverted (Radar)

×2

Brick, Modified 1 x 1 with Studs on 2 Sides, Opposite

×3

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×3

Plate, Modified 1 x 1 with Tooth Horizontal

×2

Wedge, Plate 8 x 3 Pentagonal Right

Wedge, Plate 8 x 3 Pentagonal Left

Slope, Curved 3 x 1

×2

Slope, Curved 3 x 1

×4

Wedge, Plate 2 x 4

Brick, Modified 1 x 2 with Studs on 2 Sides

×2

Barb / Claw / Horn / Tooth - Small

×15

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×3

Technic, Axle 8L with Stop

×2

Brick, Round 2 x 2 Dome Top

×5

Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes

×2

Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes

×6

Wheel 43.2mm D. x 26mm Technic Racing Small, 6 Pin Holes

Hose, Flexible Ribbed with 8mm Ends 19L / 15.2cm

×2

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×3

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

Plate, Round 4 x 4 with Hole

×2

Slope 18 4 x 1

×8

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

×2

Technic, Pin 1/2 with 2L Bar Extension (Flick Missile)

×6

Slope 18 2 x 1 x 2/3 with Grille

×4

Slope 18 2 x 1 x 2/3 with Grille

×2

Arch 1 x 6 x 2 Curved Top

Slope, Curved 3 x 2 with 4 Studs

×2

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×2

Tile 1 x 3

×2

Wedge 4 x 3 Triple Curved No Studs

Minifigure, Utensil Telescope

Technic, Axle Connector 2L (Smooth with x Hole + Orientation)

Technic, Brick 1 x 1 with Hole

×4

Technic, Brick 1 x 1 with Hole

Technic, Pin 3L with Friction Ridges

×10

Sticker Sheet for Set 70705 - (13070/6023217)

Slope, Curved 10 x 1

×4

Slope 30 1 x 2 x 2/3

×6

Technic, Axle 4L with Stop

×5

Brick, Modified 1 x 1 with Stud on Side

×2

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Minifigure, Weapon Space Ray Gun

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

×8

Tire 24 x 14 Shallow Tread, Band Around Center of Tread

×6

Hero Factory Weapon, Claw with Clip

×8

Plate, Modified 1 x 2 with Angled Bar Handles on Side

×2

Slope 45 2 x 1 with 2/3 Cutout

×10

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

×3

Slope, Curved 4 x 1 x 2/3 Double

×3

Minifigure, Weapon Gun, Two Barrel Pistol - 10-Rib Top Barrel

×2

Brick and Axle Separator

Windscreen 8 x 6 x 2 1/3 Bubble Canopy with Bar Handle

×2

Tile, Round 1 x 1

×2

Bracket 1 x 2 - 2 x 2 Inverted

×2

Bracket 1 x 2 - 1 x 2 Inverted

×4

Bracket 1 x 2 - 1 x 2

×4

Bug Obliterator

About Bug Obliterator

Part-out value

Minifigures in Bug Obliterator (4)

Parts (182)

Common questions about Bug Obliterator

How much is LEGO Bug Obliterator (70705-1) worth?

What minifigures come in LEGO set 70705-1?

Is it worth parting out LEGO Bug Obliterator?

Is LEGO Bug Obliterator (70705-1) retired?

How do I check if my Bug Obliterator set is complete?

More Space sets

Explore more

Company

Legal