About X-Wing Starfighter
X-Wing Starfighter (75218-1) is a LEGO Star Wars set released in 2018, currently averaging $75.75 used on BrickLink. It comes with 4 minifigures worth a combined $43.20. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 213 pieces.
Part-out value
Minifig value: $43.20 out of $75.75 total (57%). Over half the set's resale value is in the figures. Sellers parting this set out should list the minifigs individually on BrickLink — they'll earn more than bundling everything together.
Seller notes
- Sealed copies sell for $129.27 vs $75.75 used — a 71% premium. If you have this set new in sealed box (NISB), price it accordingly.
Minifigures in X-Wing Starfighter (4)
Parts (213)
Technic, Axle and Pin Connector Hub with 2 Perpendicular Axles
Dark Bluish Gray
Brick, Modified 1 x 2 with Studs on 1 Side
Tan×2
Plate, Modified 1 x 2 with Pin Hole on Top
Dark Bluish Gray×28
Slope, Curved 2 x 1 x 2/3
Light Bluish Gray×12
Technic, Liftarm Thin 1 x 5 - Axle Holes
Light Bluish Gray×2
Wedge, Plate 4 x 9 with Stud Notches
White×2
Tile 2 x 2 Corner
White×2
Slope, Curved 2 x 2 x 2/3
White×2
Slope, Curved 2 x 2 x 2/3
Dark Bluish Gray
Projectile Launcher, 1 x 4 Spring Shooter with Light Bluish Gray Top
Dark Bluish Gray×4
Projectile Arrow, Bar 8L with Round End (Spring Shooter Dart)
Trans-Red×6
Projectile Launcher Part, Trigger for Gun, Mini Blaster / Shooter
Dark Bluish Gray×3
Projectile Launcher, 1 x 2 Mini Blaster / Shooter
White×2
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Yellow
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Dark Green×2
Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)
Dark Bluish Gray
Tile, Modified 1 x 1 with Open O Clip
Dark Bluish Gray×3
Technic, Liftarm Thick 1 x 1 (Spacer)
Flat Silver×9
Bracket 3 x 2 x 1 1/3 with Bottom Tube
Light Bluish Gray
Plate, Modified 1 x 2 with Pin Hole on Bottom
Light Bluish Gray×4
Minifigure, Utensil Ice Axe - 3-Rib Handle
Light Bluish Gray×5
Window 1 x 4 x 1 2/3 with Spoked Rounded Top
White×12
Windscreen 8 x 4 x 2 with 2 Studs and Bar Handle with Sand Blue Cockpit Window Frames with Lines Pattern
Trans-Clear
Brick, Modified 1 x 2 x 1 2/3 with Studs on Side
Light Bluish Gray×2
Slope, Inverted 45 3 x 1 Double
Light Bluish Gray×2
Tile, Modified 1 x 2 Grille with Bottom Groove
Flat Silver×6
Plate 2 x 2 Corner
White×4
Plate 2 x 2 Corner
Black×2
Plate 2 x 2 Corner
Light Bluish Gray×12
Hinge Plate 1 x 4 Swivel (2429 / 2430)
White×3
Hinge Plate 1 x 4 Swivel (2429 / 2430)
Dark Bluish Gray
Tile 1 x 4
Light Bluish Gray×2
Plate 2 x 12
White×2
Container, Barrel 2 x 2 x 2
Dark Bluish Gray×4
Plate 4 x 4 Corner
White×2
Tile 2 x 3
White×6
Bar 8L with Stop Rings and Pin (Technic, Figure Accessory Ski Pole) - Flat End
Light Bluish Gray×4
Tile, Modified Facet 2 x 2
White×4
Technic, Pin with Short Friction Ridges
Black×9
Slope 45 2 x 1 with Cutout without Stud
White×12
Technic Engine Crankshaft Center
Tan
Brick 2 x 2
Red
Brick 2 x 2
Light Bluish Gray
Brick 1 x 2
Light Bluish Gray×5
Brick 1 x 1
White×3
Brick 1 x 1
Black×4
Brick 1 x 1
Sand Blue×4
Brick 1 x 1
Dark Red
Brick 1 x 4
Dark Red×2
Brick 1 x 4
Light Bluish Gray×2
Minifigure, Weapon Gun, Pistol Revolver - Large Barrel and Solid Handle
Dark Bluish Gray×3
Plate 2 x 4
White×3
Plate 2 x 4
Red×3
Plate 2 x 4
Black×2
Plate 2 x 4
Dark Bluish Gray×7
Plate 2 x 3
White
Plate 2 x 3
Green
Plate 2 x 3
Light Bluish Gray×2
Plate 2 x 2
Tan
Plate 2 x 2
Black×4
Plate 1 x 2
White×8
Plate 1 x 2
Tan×3
Plate 1 x 2
Blue×4
Plate 1 x 2
Black×7
Plate 1 x 2
Dark Turquoise×2
Plate 1 x 2
Dark Red×8
Plate 1 x 2
Dark Bluish Gray×10
Plate 1 x 2
Light Bluish Gray×6
Plate 1 x 2
Bright Light Yellow×4
Plate 1 x 1
Light Bluish Gray×3
Plate 1 x 1
Bright Light Yellow×5
Plate 4 x 4
Light Bluish Gray×4
Wedge, Plate 12 x 6 Left
White×2
Wedge, Plate 12 x 6 Right
White×2
Bar 4L (Lightsaber Blade / Wand)
Trans-Light Blue
Slope 45 2 x 1
White×2
Brick, Modified 1 x 4 with Studs on Side
White×2
Brick, Modified 1 x 4 with Studs on Side
Red×2
Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots
Black
Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots
Dark Bluish Gray×2
Brick, Round 1 x 1
Red
Tile 2 x 2
White
Tile 2 x 2
Dark Red×4
Tile 1 x 2
White
Tile 1 x 2
Sand Blue
Tile 1 x 2
Dark Red×4
Tile 1 x 2
Light Bluish Gray
Tile 1 x 1
White×3
Tile 1 x 1
Sand Blue×12
Plate, Modified 2 x 3 with Hole
Light Bluish Gray
Technic, Brick 1 x 2 with Holes
White×2
Technic, Plate 2 x 6 with 5 Holes
Black
Technic, Pin 3/4
Tan×2
Plate, Modified 1 x 2 with Door Rail
Dark Tan
Plate, Modified 1 x 2 with Door Rail
Dark Bluish Gray×6
Technic, Axle and Pin Connector Angled #2 - 180 degrees
Black×3
Technic, Axle Connector with Axle Hole
Light Bluish Gray
Technic, Pin 3L with Friction Ridges and Stop Bush
Light Bluish Gray×4
Technic, Axle 2L Notched
Red×4
Technic, Brick 1 x 2 with Axle Hole
Yellow×2
Technic, Brick 1 x 2 with Axle Hole
Black×2
Technic, Brick 1 x 2 with Axle Hole
Dark Bluish Gray×4
Technic, Axle 5L
Light Bluish Gray×2
Technic, Axle 5.5L with Stop
Dark Bluish Gray
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Red
Technic, Pin Connector Plate 1 x 2 x 1 2/3 with 2 Holes on Top
Dark Bluish Gray×4
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
Red×2
Brick, Modified 1 x 1 x 1 2/3 with Studs on Side
Dark Bluish Gray×2
Slope 33 3 x 4
White×4
Plate, Modified 1 x 3 with 2 Studs (Double Jumper)
Medium Blue×2
Plate 1 x 8
White×4
Plate 1 x 8
Black×2
Plate 1 x 8
Dark Bluish Gray×4
Plate 1 x 8
Light Bluish Gray×4
Brick 1 x 3
White×2
Plate 1 x 3
White×4
Plate 1 x 3
Tan×4
Plate 1 x 3
Black×8
Plate 1 x 3
Dark Bluish Gray×2
Hinge Plate 2 x 4 with Articulated Joint - Male
Dark Bluish Gray×4
Plate 1 x 6
White×5
Technic, Pin without Friction Ridges
Light Bluish Gray×3
Slope, Inverted 45 2 x 2 Double Convex
White×2
Technic, Brick 1 x 4 with Holes
Black×2
Technic, Axle 8L
Red
Technic, Plate 2 x 4 with 3 Holes
Black
Plate 1 x 4
White×5
Plate 1 x 4
Red×2
Plate 1 x 4
Dark Red×2
Plate 1 x 4
Dark Bluish Gray×26
Technic, Plate 2 x 8 with 7 Holes
Light Bluish Gray×2
Technic, Axle 1L with Pin without Friction Ridges with Round Hole
Tan
Plate 2 x 6
White×2
Plate 2 x 6
Red×3
Plate 2 x 6
Lime
Hinge Brick 1 x 4 Swivel Top
Dark Red×2
Hinge Brick 1 x 4 Swivel Base
Dark Red×2
Plate 2 x 10
White×4
Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment
White
Technic, Brick 1 x 6 with Holes
Dark Bluish Gray×2
Hinge Brick 1 x 2 Base
Light Bluish Gray×2
Hinge Brick 1 x 2 Top Plate
Light Bluish Gray×2
Plate 6 x 6
White×4
Plate, Round 2 x 2 with Axle Hole
Dark Turquoise×4
Plate, Round 1 x 1
Trans-Red×5
Plate, Round 1 x 1
Dark Bluish Gray×37
Minifigure, Utensil Seat / Chair 2 x 2
Black
Cylinder 4 x 4 x 1 2/3 with Pin Holes and Center Bar
Light Bluish Gray×4
Tile 1 x 8
White×2
Technic, Liftarm Thin 1 x 2 - Axle Holes
Light Bluish Gray×4
Brick, Modified 1 x 2 with Channel
White×2
Technic Bush 1/2 Smooth
Yellow×4
Technic Bush 1/2 Smooth
Light Bluish Gray×12
Technic, Pin 1/2 without Friction Ridges
Blue×3
Slope 33 3 x 1
White×4
Wedge 6 x 4 Triple Curved
Light Bluish Gray
Wedge 6 x 4 Triple Inverted Curved
White×2
Wedge, Plate 4 x 4
Light Bluish Gray
Wedge, Plate 3 x 2 Right
White×3
Wedge, Plate 3 x 2 Left
White×2
Wedge, Plate 3 x 2 Left
Dark Bluish Gray
Technic, Axle 7L
Light Bluish Gray×4
Hinge Tile 1 x 3 Locking with 1 Finger on Top
Dark Bluish Gray
Plate 1 x 10
Tan
Plate 1 x 10
Dark Red×2
Technic, Axle 3L
Light Bluish Gray×4
Cone 1 x 1 with Top Groove
Trans-Dark Pink×4
Cone 1 x 1 with Top Groove
Light Bluish Gray×2
Tap 1 x 1 without Hole in Nozzle End
Light Bluish Gray×2
Dish 2 x 2 Inverted (Radar)
White×4
Dish 2 x 2 Inverted (Radar)
Dark Bluish Gray
Slope, Inverted 45 4 x 2 Double with 2 x 2 Cutout
White×2
Slope 30 1 x 1 x 2/3
White×5
Wheel 18mm D. x 14mm with Axle Hole, Fake Bolts and Shallow Spokes
Flat Silver×4
Technic, Axle Connector Hub with 3 Axles
Light Bluish Gray×2
Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes
Light Bluish Gray
Windscreen 5 x 2 x 1 2/3
White×2
Minifigure, Utensil Hose Nozzle Elaborate
Light Bluish Gray×2
Slope 18 2 x 1 x 2/3 with Grille
Dark Bluish Gray×6
Tile, Modified 4 x 4 with Studs on Edge
White×4
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Black×4
Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)
Light Bluish Gray×4
Tile 1 x 3
White×2
Bar 6L with Stop Ring
White×4
Minifigure, Weapon Lightsaber Hilt Straight
Metallic Silver×2
Technic, Axle Connector 2L (Smooth with x Hole + Orientation)
Dark Bluish Gray×2
Technic, Brick 1 x 1 with Hole
Tan×2
Technic, Brick 1 x 1 with Hole
Light Bluish Gray×4
Technic, Axle 2L with Reverser Handle Axle Connector
Black
Technic, Pin 3L with Friction Ridges
Blue×4
Technic, Liftarm Thin 1 x 3 - Axle Holes
White×2
Sticker Sheet for Set 75218 - (39626/6236650)
(Not Applicable)
Plate, Round 1 x 1 with Open Stud
White×5
Slope, Curved 10 x 1
White×4
Slope 30 1 x 2 x 2/3
White×8
Slope 30 1 x 2 x 2/3
Black
Slope 30 1 x 2 x 2/3
Dark Red
Slope 30 1 x 2 x 2/3
Dark Bluish Gray
Slope 30 1 x 2 x 2/3 with Red, White, and Silver Buttons, Dark Red Screens Pattern
Dark Bluish Gray
Tile 2 x 4
White×2
Brick, Modified 1 x 1 with Stud on Side
Light Bluish Gray×2
Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)
Light Bluish Gray
Brick, Modified Facet 2 x 2
Dark Bluish Gray×2
Plate, Modified 1 x 2 with Clip with Center Cut on Top
Light Bluish Gray×2
Plate, Modified 1 x 4 with 2 Studs without Groove
White×3
Minifigure, Weapon Gun, Blaster SW Small with Scope
Black×2
Slope 45 2 x 1 with 2/3 Cutout
White×2
Slope, Curved 4 x 1 x 2/3 Double
White×2
Brick and Axle Separator
Orange
Minifigure, Utensil Ingot 1 x 2
Light Bluish Gray×2
Bracket 1 x 2 - 1 x 2
Black
Bracket 1 x 2 - 1 x 2
Light Bluish Gray×4
Rubber Belt Small (Round Cross Section) - Approx. 2 x 2
White×4Common questions about X-Wing Starfighter
How much is LEGO X-Wing Starfighter (75218-1) worth?
X-Wing Starfighter sells for an average of $75.75 used and $129.27 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness — missing minifigures or key parts will lower the value.
What minifigures come in LEGO set 75218-1?
This set includes 4 minifigures: Astromech Droid, R2-D2 - Flat Silver Head, Lavender Dots and Small Receptor ($2.15), Astromech Droid, R2-Q2 (Large Red Dots) ($8.58), Biggs Darklighter - Light Nougat Head, Dual Molded Helmet ($14.05), Luke Skywalker - Pilot, Dual Molded Helmet ($18.42). The minifigures have a combined BrickLink value of $43.20. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.
Is it worth parting out LEGO X-Wing Starfighter?
The minifigures make up about 57% of the set value ($43.20 out of $75.75). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.
Is LEGO X-Wing Starfighter (75218-1) retired?
Yes, X-Wing Starfighter was released in 2018 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.
How do I check if my X-Wing Starfighter set is complete?
Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.