How much is LEGO Arctic Icebreaker (60062-1) worth?

Arctic Icebreaker sells for an average of $139.65 used and $314.99 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60062-1?

This set includes 7 minifigures: Arctic Explorer, Male with Orange Goggles ($1.41), Arctic Explorer, Male with Green Goggles ($1.46), Arctic Helicopter Pilot ($1.79), Arctic Captain ($7.37), plus 3 more. The minifigures have a combined BrickLink value of $20.59. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Arctic Icebreaker?

The minifigures make up about 15% of the set value ($20.59 out of $139.65). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Arctic Icebreaker (60062-1) retired?

Yes, Arctic Icebreaker was released in 2014 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms. At its current price point, it has appreciated since retirement.

How do I check if my Arctic Icebreaker set is complete?

Use the parts list on this page to check every piece and all 7 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Arctic Icebreaker

60062-1·Town / City·2014·7 minifigs·294 parts

Used Avg

$139.65

New Avg

$314.99

Add to your inventory Scan the minifigs

About Arctic Icebreaker

Arctic Icebreaker (60062-1) is a LEGO Town / City set released in 2014, currently averaging $139.65 used on BrickLink. It comes with 7 minifigures worth a combined $20.59. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 294 pieces.

Parts (294)

Minifigure, Utensil Magnifying Glass Thick Frame and Solid Handle with Trans-Clear Lens

Minifigure Footgear Snowshoe - Short Front End

×2

Slope, Curved 8 x 2 x 2 Double

×2

Plate, Modified 1 x 2 with Pin Hole on Top

×2

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

×4

Slope, Curved 2 x 1 x 2/3

×3

Wedge 6 x 4 Cutout (Train Roof) with 5 Large Bottom Tubes

×2

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

×4

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

Tile, Round 2 x 2 with Bottom Stud Holder

×2

Slope, Curved 2 x 2 x 2/3

×2

Slope, Curved 2 x 2 x 2/3

×4

Slope, Curved 2 x 2 x 2/3 with Dark Blue and White Arctic Explorer Logo Pattern

×2

Road Sign 2 x 2 Square with Open O Clip

Helicopter Landing Ski 1 x 6 with Pin Hole {15625}

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Dog, Husky with Marbled Dark Bluish Gray Ears and Back and Printed Black Eyes and Nose, White Face and Ears Pattern

×4

Window 2 x 6 x 2 Train Front / Boat

×2

Glass for Train Front 2 x 6 x 2

×2

Minifigure, Utensil Ice Axe - 3-Rib Handle

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×22

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Propeller 3 Blade Small

Tile 1 x 4

Tile, Modified 1 x 2 with Bar Handle

×4

Tile, Modified 1 x 2 with Bar Handle

Brick, Modified 2 x 4 x 2 with Studs on Sides

Vehicle, Spoiler / Plow Blade 6 x 3 with Hinge

Minifigure, Visor Standard

Slope, Inverted 75 2 x 1 x 3

×2

Brick 2 x 6

Tile, Modified 2 x 2 with Pin

×3

Propeller 4 Blade 5 Diameter with Rounded Ends and Open Hub

Vehicle, Tipper Bed Small

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×3

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

Tile, Modified 1 x 1 with Clip

×2

Antenna Whip 8H

×2

Antenna Whip 8H

×2

String Reel 2 x 2 Holder

String Reel 2 x 2 Drum

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Plate, Round 2 x 2 with Rounded Bottom (Boat Stud)

×2

Technic Slope 4 x 1 x 1 2/3

×2

Technic, Pin with Short Friction Ridges

×15

Brick, Modified 1 x 2 with Grille / Fluted Profile

Brick 2 x 4

×2

Brick 2 x 4

Brick 2 x 3

Brick 2 x 2

×7

Brick 2 x 2

×3

Brick 2 x 2

×5

Minifigure, Utensil Handlebars

Brick 1 x 2

×4

Brick 1 x 2

×3

Brick 1 x 1

×2

Brick 1 x 1

×4

Brick 2 x 10

Brick 1 x 8

×4

Minifigure, Utensil Camera Handheld Style with Extended Bar Handle

Brick 1 x 6

Brick 1 x 4

×6

Brick 1 x 4

Chain 21 Links (16-17L)

×2

Brick, Modified 1 x 2 with Log Profile

×6

Container, Crate 3 x 4 x 1 2/3 with Handholds

×3

Plate, Modified 2 x 4 with Pins and Thin Angled Supports

×3

Minifigure, Utensil Binoculars Town

×2

Minifigure, Utensil Tool Circular Blade Saw

Plate 2 x 4

×5

Plate 2 x 4

×2

Plate 2 x 4

×7

Plate 2 x 3

×2

Plate 2 x 3

Plate 2 x 2

×4

Plate 2 x 2

×5

Plate 2 x 2

×3

Plate 1 x 2

×5

Plate 1 x 2

×9

Plate 1 x 2

×3

Plate 1 x 2

×2

Brick, Modified 1 x 2 with Bar Handle on Side

Rock 4 x 4 Octagonal Boulder, Top

×3

Rock 4 x 4 Octagonal Boulder, Bottom

×3

Plate 4 x 10

Plate 4 x 6

Plate 6 x 10

Plate 2 x 8

×4

Plate 2 x 8

×2

Minifigure, Utensil Flotation Ring (Life Preserver)

×2

Plate 4 x 8

Tile, Modified 2 x 3 with 2 Open O Clips

×3

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 3

×2

Hook with Tow Ball

×2

Slope 45 2 x 2 with Radar and Disk Slot Pattern

Slope 45 2 x 2 with Black and Green Radar Screen, Digital '38', Buttons, and Dial Pattern

Slope 45 2 x 1

×3

Slope 45 2 x 1

×2

Hinge Cylinder 1 x 2 Locking with 2 Fingers and Axle Hole on Ends with Slots

Plate, Round Corner 4 x 4

×2

Brick, Round 1 x 1

Tile 2 x 2

Tile 1 x 2

×2

Tile 1 x 2

×2

Tile 1 x 2

×8

Tile 1 x 2 with Black Tape Reels Pattern

Tile 1 x 2 with Computer Keyboard Standard Pattern

Brick 1 x 2 x 2 with Inside Stud Holder

×4

Brick 1 x 2 x 2 with Inside Stud Holder

×4

Brick 1 x 2 x 2 with Inside Stud Holder

Arch 1 x 8 x 2

×4

Plate 1 x 8

×2

Fence 1 x 4 x 1 Lattice

×2

Plate 1 x 6

×3

Plate 1 x 6

×2

Slope 65 2 x 2 x 2 with Bottom Tube

Turntable 2 x 2 Plate, Top

×2

Turntable 2 x 2 Plate, Base

×2

Technic, Brick 1 x 2 with Hole

Technic, Axle 4L

Plate 1 x 4

×4

Plate 1 x 4

×8

Plate 1 x 4

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

×4

Plate, Modified 1 x 2 with 1 Stud with Groove (Jumper)

×2

Plate 2 x 6

×2

Plate 2 x 6

×6

Plate 2 x 6

×3

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

×2

Minifigure, Utensil Axe

Minifigure, Utensil Push Broom

Minifigure, Utensil Shovel / Spade - Handle with Round End

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

×2

Plate, Modified 1 x 2 with Bar Handles - Flat Ends, Low Attachment

Minifigure, Utensil Pickaxe

Minifigure, Utensil Cup

Hinge Brick 1 x 2 Top Plate

Support 2 x 2 x 2 Stand with Complete Hole

×6

Brick, Round 2 x 2 with Axle Hole

×3

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

×4

Plate 6 x 6

Dish 8 x 8 Inverted (Radar) - Solid Studs

Minifigure, Utensil Radio (Walkie-Talkie) with Extended Handle

×2

Plate, Round 2 x 2 with Axle Hole

×2

Plate, Round 1 x 1

×12

Plate, Round 1 x 1

×2

Plate, Round 1 x 1

×4

Plate, Round 1 x 1

×5

Minifigure, Utensil Seat / Chair 2 x 2

Bar 1 x 4 x 2 with Open Studs

×2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×2

Plate, Modified 1 x 1 with Open O Clip Thick (Vertical Grip)

×6

Tile, Round 2 x 2

×2

Tile 1 x 8

×2

Tile 1 x 8

×6

Ladder 1 1/2 x 2 x 2

×2

Door 1 x 4 x 5 Train Right, Thin Support at Bottom

Glass for Train Door with Lip on Top and Bottom

Plate, Modified 2 x 2 with Vents

×2

Technic, Pin 1/2 without Friction Ridges

×3

Boat, Mast 2 x 2 x 3 Inclined with Stud on Top and Two Sides

Technic, Axle 1L with Pin with Friction Ridges

×2

Container, Box 2 x 2 x 2

Container, Box 2 x 2 x 2 Door with Slot

Minifigure, Utensil Loudhailer / Megaphone / SW Blaster

Minifigure, Utensil Camera with Side Sight (Space Gun)

Dish 3 x 3 Inverted (Radar)

Slope 75 2 x 1 x 3 - Hollow Stud

×4

Slope 75 2 x 1 x 3 - Hollow Stud

×2

Tail Shuttle, Small

Bracket 1 x 2 - 2 x 2

×2

Plate 1 x 10

×2

Plate, Modified 2 x 2 with Wheel Holder

Plate, Modified 1 x 8 with Door Rail

×2

Plate, Modified 1 x 8 with Door Rail

Wedge 4 x 4 x 2/3 Triple Curved

×2

Brick, Round 1 x 1 with Fins

Antenna Small Base with Black Lever (4592 / 4593)

×2

Antenna Small Base with Black Lever (4592 / 4593)

×3

Tap 1 x 1 without Hole in Nozzle End

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×2

Brick, Modified 1 x 1 with Studs on 4 Sides

Dish 2 x 2 Inverted (Radar)

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

Bar 12L with Open Stud, Tow Ball, and Slit (Boat Mast)

×2

Plate, Modified 2 x 2 with Wheels Holder Wide - Technic Pins

Wedge 4 x 3 Open with Cutout and 4 Studs

Rock Panel 2 x 4 x 6

Brick, Round Corner 4 x 4 Macaroni with 3 Studs

×2

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

Panel 1 x 2 x 1 with Rounded Corners

×4

Panel 1 x 2 x 1 with Rounded Corners

×2

Plate, Modified 1 x 2 with Racers Car Grille

×4

Rock 1 x 1 Crystal 5 Point

×5

Slope 30 1 x 1 x 2/3

×5

Brick, Round 2 x 2 Dome Top

Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes

×6

Window 1 x 2 x 2 Plane, Single Hole Top and Bottom for Glass

×3

Sticker Sheet for Set 60062 - (14939/6044724)

Bar 7 x 3 with 2 U Clips (Ladder)

×2

Slope, Inverted 45 6 x 4 Double with 4 x 4 Cutout and 3 Holes

×2

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

Plate, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Plate, Modified 1 x 2 with Bar Handle on End

×4

Plate, Modified 1 x 2 with Bar Handle on End

×2

Panel 1 x 4 x 3 with Side Supports - Hollow Studs

×4

Glass for Window 1 x 2 x 2 Flat Front

×17

Minifigure, Utensil Hose Nozzle Elaborate

×3

Slope, Curved 2 x 1 x 1 1/3 with Recessed Stud

Brick 1 x 10

Minifigure, Utensil Tool Chainsaw Blade

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Window 1 x 4 x 2 Plane, Single Top Hole and Single Bottom Hole for Glass

×2

Window 1 x 4 x 2 Plane, Single Top Hole and Single Bottom Hole for Glass

×5

Turntable 4 x 4 Square Base, Locking

Slope, Curved 4 x 4 x 2 with 4 Studs and Pin Holes

×4

Container, Box 2 x 2 x 2 - Top Opening

Bar 1 x 4 x 3 Grille with End Protrusions

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×3

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×4

Boat, Hull Unitary 51 x 12 x 6 with Side Bulges with Dark Bluish Gray Top (62791 / 54101)

Tile 1 x 3

×4

Tile 1 x 3

×2

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

Minifigure, Utensil Telescope

Fish

Tile 1 x 6

×4

Tile, Round 2 x 2 with Lifting Ring Thick and Bottom Stud Holder

×3

Plate, Modified 2 x 2 with Bar Frame Octagonal, Reinforced, Completely Round Studs

Windscreen 3 x 4 x 3

Slope 30 1 x 2 x 2/3

×3

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3

×5

Brick, Modified 1 x 1 with Stud on Side

×4

Panel 1 x 2 x 2 with Side Supports - Hollow Studs

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×10

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

Windscreen 6 x 4 x 2 Bubble Canopy with Bar Handle

Plate, Modified 10 x 10 Octagonal with Hole

Plate 8 x 16

Hinge Plate 2 x 2 Locking with 1 Finger on Top

Plate, Modified 1 x 4 with 2 Studs without Groove

×4

Minifigure, Utensil Metal Detector, no Stud on Search Head

Slope, Curved 4 x 1 x 2/3 Double

×2

Slope, Curved 4 x 1 x 2/3 Double

×2

Slope, Curved 4 x 1 x 2/3 Double

×4

Support 2 x 2 x 10 Girder Triangular Vertical - Type 4 - 3 Posts, 3 Sections

Boat, Anchor - Two Top Holes

Brick and Axle Separator

Cone 2 x 2 Truncated

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×7

Tile, Round 1 x 1

×10

Tile, Round 1 x 1

×7

Tile, Round 1 x 1

×2

Plate, Modified 1 x 4 with Tow Ball Socket, Flattened with Holes

Hinge Plate 2 x 4 with Pin Hole and 3 Holes - Bottom

Hinge Plate 2 x 4 with Pin Hole and 3 Holes - Top

Bear with 2 Studs on Back with Black Eyes and Nose Pattern (Polar Bear)

Arm Mechanical, Exo-Force / Bionicle, Thick Support

Minifigure, Utensil Handlebars with Angular Handles

×2

Minifigure, Utensil Ski without Hinge

×2

Bracket 1 x 2 - 1 x 2

×2

String, Cord Thin 50cm

Tread with 20 Treads Small

×2

Arctic Icebreaker

About Arctic Icebreaker

Part-out value

Seller notes

Minifigures in Arctic Icebreaker (7)

Parts (294)

Common questions about Arctic Icebreaker

How much is LEGO Arctic Icebreaker (60062-1) worth?

What minifigures come in LEGO set 60062-1?

Is it worth parting out LEGO Arctic Icebreaker?

Is LEGO Arctic Icebreaker (60062-1) retired?

How do I check if my Arctic Icebreaker set is complete?

More Town / City sets

Explore more

Company

Legal