How much is LEGO Heavy-Duty Rescue Helicopter (60166-1) worth?

Heavy-Duty Rescue Helicopter sells for an average of $47.49 used and $67.09 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60166-1?

This set includes 4 minifigures: Coast Guard City - Female Rescuer with Scuba Diver Mask ($1.75), Coast Guard City - Female Watercraft Pilot with Dark Red Hair ($1.91), Coast Guard City - Helicopter Pilot with Moustache ($1.54), Coast Guard City - Kayak Passenger Harassed by Shark ($1.77). The minifigures have a combined BrickLink value of $6.97. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Heavy-Duty Rescue Helicopter?

The minifigures make up about 15% of the set value ($6.97 out of $47.49). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Heavy-Duty Rescue Helicopter (60166-1) retired?

Yes, Heavy-Duty Rescue Helicopter was released in 2017 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Heavy-Duty Rescue Helicopter set is complete?

Use the parts list on this page to check every piece and all 4 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Heavy-Duty Rescue Helicopter

60166-1·Town / City·2017·4 minifigs·195 parts

Used Avg

$47.49

New Avg

$67.09

Add to your inventory Scan the minifigs

About Heavy-Duty Rescue Helicopter

Heavy-Duty Rescue Helicopter (60166-1) is a LEGO Town / City set released in 2017, currently averaging $47.49 used on BrickLink. It comes with 4 minifigures worth a combined $6.97. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 195 pieces.

Parts (195)

Plate, Modified 2 x 2 with Pin Hole - Full Cross Support Underneath

Bracket 5 x 2 x 1 1/3 with 2 Holes and Bottom Tube

Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)

Wheel 18mm D. x 8mm with Fake Bolts and Deep Spokes with Inner Ring

×2

Shark Body with Debossed Gills

Panel 1 x 4 x 2 with Side Supports - Hollow Studs

×2

Tile, Round 2 x 2 with Bottom Stud Holder

Slope, Curved 2 x 2 x 2/3

×3

Slope, Curved 2 x 2 x 2/3

×3

Tile, Round 2 x 2 with Hole with Rotor Blade Pattern

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

Propeller 3 Blade 9 Diameter with Center Recessed

Arch 1 x 8 x 2 Raised

×2

Technic, Axle 2L with Pin with Friction Ridges

Tile, Round 2 x 2 with Open Stud

Plate, Round Corner 2 x 6 Double

Shark Head with Rounded Nose with Black Eyes with White Partial Circle Glints Pattern

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

Brick 1 x 2 x 3

Plate, Round Half 4 x 8

Tile, Modified 1 x 2 Grille with Bottom Groove

×4

Tile, Modified 1 x 2 Grille with Bottom Groove

×2

Wedge, Plate 3 x 6 Cut Corners

Plate 2 x 2 Corner

×4

Slope, Curved 3 x 2

Tile 1 x 4

×2

Tile 1 x 4

×2

Technic, Axle 3L with Stop

Tile, Modified 1 x 2 with Bar Handle

Minifigure, Visor Standard

Wedge, Plate 3 x 3 Cut Corner

×2

Brick 2 x 6

×2

Brick 1 x 16

×4

Antenna Whip 8H

Brick, Round Corner 4 x 4 Full Brick

×4

String Reel 2 x 2 Holder

String Reel 2 x 2 Drum

Technic, Axle Connector 3L

Plate, Modified 2 x 4 with Pin Holes

×2

Technic, Disk 3 x 3

Technic, Pin with Short Friction Ridges

×5

Vehicle, Mudguard 4 x 3 x 1 with Arch Curved

×2

Boat, Kayak

Brick 2 x 3

×2

Brick 2 x 3

Brick 2 x 2

Minifigure, Utensil Handlebars

Brick 1 x 2

×3

Brick 1 x 1

×2

Brick 2 x 10

×2

Brick 1 x 8

×2

Brick 1 x 8

×2

Brick 1 x 6

×2

Minifigure, Visor Scuba Diver Mask

Brick 1 x 4

×3

Plate 2 x 4

×2

Plate 2 x 4

Plate 2 x 3

×2

Plate 2 x 3

×2

Plate 2 x 2

×2

Plate 2 x 2

Plate 1 x 2

×9

Plate 1 x 2

×3

Plate 1 x 1

×5

Plate 6 x 12

Plate 4 x 4

Plate 6 x 10

Plate 2 x 8

×2

Plate 2 x 8

Plate 4 x 8

×3

Tile, Modified 2 x 3 with 2 Open O Clips

×2

Plate 6 x 8

×2

Slope 18 4 x 2

×2

Slope 18 4 x 2

×2

Bar 4L (Lightsaber Blade / Wand)

Slope 45 2 x 2

×2

Hook with Tow Ball

Slope 45 2 x 2 with Aircraft Green and Yellow Horizon Indicator, Controls, Black Buttons, Silver Slider and Switches Pattern

Slope 45 2 x 2 with Black and Green Radar Screen, Digital '38', Buttons, and Dial Pattern

Brick, Modified 1 x 4 with Studs on Side

×2

Hinge Brick 1 x 2 Locking with 2 Fingers Horizontal End

Hinge Cylinder 1 x 2 Locking with 1 Finger and Axle Hole on Ends with Slots

Plate, Modified 2 x 8 with Door Rail

×2

Plate, Modified 2 x 8 with Door Rail

×2

Brick, Modified 2 x 4 with Pin on Top and Side Cutouts

Tile 2 x 2

Tile 1 x 1

×2

Tile 1 x 1

×2

Plate, Modified 2 x 3 with Hole

Minifigure, Utensil Oar / Paddle Head

×3

Technic, Axle 2L Notched

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×2

Technic, Plate 1 x 5 with Smooth Ends, 4 Studs and Center Axle Hole

×12

Technic Driving Ring Extension

×2

Technic, Axle and Pin Connector Angled #4 - 135 degrees

×2

Technic, Gear 12 Tooth Double Bevel

Brick 1 x 2 x 2 with Inside Stud Holder

×6

Technic, Liftarm Thick 1 x 7

Plate 1 x 8

×4

Plate 1 x 8

×2

Plate 1 x 3

×2

Plate 1 x 6

×5

Technic, Pin without Friction Ridges

×5

Turntable 2 x 2 Plate, Top

Turntable 2 x 2 Plate, Base

Technic, Brick 1 x 2 with Hole

Technic, Brick 1 x 4 with Holes

Plate 1 x 4

×11

Technic Bush

×2

Slope, Inverted 33 3 x 2 with Flat Bottom Pin and Connections between Studs

Technic, Brick 1 x 6 with Holes

×2

Brick, Round 2 x 2 with Axle Hole

×3

Brick, Round 2 x 2 with Axle Hole

×2

Brick, Round 2 x 2 with Axle Hole

Plate, Modified 1 x 1 with Light Attachment - Thick Ring

Wedge 6 x 2 Right

Wedge 6 x 2 Left

Wedge 4 x 2 Right

Wedge 4 x 2 Left

Wedge, Plate 4 x 2 Right

×2

Wedge, Plate 4 x 2 Left

×2

Slope, Curved 6 x 1 with 2 Studs

×4

Technic Bush 1/2 Smooth

×2

Slope 33 3 x 1

×6

Slope 33 3 x 1

×4

Slope, Inverted 33 3 x 1

×6

Slope, Inverted 33 3 x 1

×2

Slope, Inverted 33 3 x 1

×2

Technic, Axle 1L with Pin with Friction Ridges

×5

Wedge 6 x 4 Triple Curved

×2

Wedge, Plate 3 x 2 Right

×2

Wedge, Plate 3 x 2 Left

×2

Technic, Liftarm Thick 1 x 2

Dish 3 x 3 Inverted (Radar)

Slope, Curved 6 x 2

×2

Cone 1 x 1 with Top Groove

×2

Plate, Modified 1 x 2 with Bar Arm Up (Horizontal Arm 5mm)

×3

Wheel 8mm D. x 6mm

×7

Wedge, Plate 12 x 3 Left

Wedge, Plate 12 x 3 Right

Wedge, Plate 3 x 4 with Stud Notches

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×4

Panel 1 x 2 x 1 with Rounded Corners

×2

Plate, Modified 2 x 2 Thin with Dual Wheels Holder - Split Pins

×3

Wedge 4 x 4 Triple with Stud Notches

Wedge, Plate 8 x 3 Pentagonal Left

Wedge 10 x 3 Left

Wedge 10 x 3 Right

Brick, Modified 1 x 2 with Studs on 2 Sides

×3

Slope, Inverted 45 6 x 1 Double with 1 x 4 Cutout

×3

Wedge, Plate 6 x 3 Right

Wedge, Plate 6 x 3 Left

Brick, Round 2 x 2 Dome Top

Wheel 18mm D. x 14mm with Pin Hole, Fake Bolts and Shallow Spokes

Tire 14mm D. x 4mm Smooth Small Single with Number Embossed on Side

×7

Sticker Sheet for Set 60166 - (34093/6192831)

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

×2

Plate, Round 4 x 4 with Hole

Plate, Modified 1 x 2 with Bar Handle on End

×4

Glass for Window 1 x 2 x 2 Flat Front

×4

Window 1 x 4 x 2 Plane, Single Top Hole and Single Bottom Hole for Glass

×2

Slope 18 2 x 1 x 2/3 with Grille

×2

Slope, Curved 2 x 4 Double with Groove

×6

Windscreen 5 x 8 x 2

Plate, Modified 2 x 16 with Angled Side Extensions and Axle Hole (Rotor Blade)

×6

Bar 6L with Stop Ring

Wedge 4 x 3 Triple Curved No Studs

Technic, Plate Rotor 6 Blade with Clip Ends Connected (Water Wheel) - Hollow Studs

Technic, Gear 12 Tooth Bevel

Tile 1 x 6

×2

Tile 1 x 6

×3

Slope, Curved 10 x 1

×2

Slope, Curved 10 x 1

×2

Slope 30 1 x 2 x 2/3

×2

Slope 30 1 x 2 x 2/3 with 2 Gauges and Silver Outline Pattern

Tile 2 x 4

×8

Technic, Axle 4L with Stop

Panel 1 x 2 x 3 with Side Supports - Hollow Studs

×2

Aircraft Fuselage Forward Bottom Curved 6 x 10 with 3 Holes

Tail 12 x 2 x 5

Slope, Curved 2 x 4 x 2/3 with Bottom Tubes

Plate 2 x 14

Plate 8 x 16

Brick, Round 2 x 2 with Axle Hole and Grille / Fluted Profile

Bracket 1 x 2 - 2 x 4

×6

Brick and Axle Separator

Tile, Round 1 x 1

×3

Tile, Round 1 x 1

×2

Plate, Modified 2 x 2 x 2/3 with 2 Studs on Side

Bracket 1 x 2 - 2 x 2 Inverted

String, Cord Thin 50cm

Heavy-Duty Rescue Helicopter

About Heavy-Duty Rescue Helicopter

Part-out value

Minifigures in Heavy-Duty Rescue Helicopter (4)

Parts (195)

Common questions about Heavy-Duty Rescue Helicopter

How much is LEGO Heavy-Duty Rescue Helicopter (60166-1) worth?

What minifigures come in LEGO set 60166-1?

Is it worth parting out LEGO Heavy-Duty Rescue Helicopter?

Is LEGO Heavy-Duty Rescue Helicopter (60166-1) retired?

How do I check if my Heavy-Duty Rescue Helicopter set is complete?

More Town / City sets

Explore more

Company

Legal