How much is LEGO Arctic Mobile Exploration Base (60195-1) worth?

Arctic Mobile Exploration Base sells for an average of $97.68 used and $161.39 new/sealed on BrickLink based on 6 months of completed sales. As a retired set, prices tend to hold steady or appreciate over time, especially for complete sets with original packaging. Actual prices vary with completeness. Missing minifigures or key parts will lower the value.

What minifigures come in LEGO set 60195-1?

This set includes 6 minifigures: Arctic Explorer - Male, Dark Blue Legs, Dark Azure Beanie, Medium Azure Ski Goggles ($1.30), Arctic Climber ($2.00), Arctic Explorer Female - Fur-Lined Hood, Light Blue Ski Goggles ($1.79), Arctic Explorer Female - Dirt Bike Helmet, Goggles ($1.70), plus 2 more. The minifigures have a combined BrickLink value of $10.24. Each figure is linked above with individual pricing if you're looking to buy or sell specific characters.

Is it worth parting out LEGO Arctic Mobile Exploration Base?

The minifigures make up about 10% of the set value ($10.24 out of $97.68). Most of the value is in the complete set package, so selling it whole is likely the better move unless you have buyers lined up for specific figures.

Is LEGO Arctic Mobile Exploration Base (60195-1) retired?

Yes, Arctic Mobile Exploration Base was released in 2018 and has been retired from retail for several years. Retired LEGO sets are only available on the secondary market through BrickLink, eBay, or other resale platforms.

How do I check if my Arctic Mobile Exploration Base set is complete?

Use the parts list on this page to check every piece and all 6 minifigures. For the minifigures specifically, you can use the brick'em scanner to identify each figure from a photo and confirm it matches what should be in this set. Missing pieces can be individually sourced on BrickLink.

Arctic Mobile Exploration Base

60195-1·Town / City·2018·6 minifigs·242 parts

Used Avg

$97.68

New Avg

$161.39

Add to your inventory Scan the minifigs

About Arctic Mobile Exploration Base

Arctic Mobile Exploration Base (60195-1) is a LEGO Town / City set released in 2018, currently averaging $97.68 used on BrickLink. It comes with 6 minifigures worth a combined $10.24. The set has retired from retail, so secondary market is the only option. The full parts inventory runs 242 pieces.

Parts (242)

Tile 6 x 6 with Bottom Tubes, Textured Surface

Minifigure Footgear Snowshoe - Short Front End

×4

Brick, Modified 1 x 2 with Studs on 1 Side

Plate, Round 6 x 6 with Hole

Plate, Modified 4 x 4 with 2 Open O Clips (Horizontal Grip)

×2

Slope, Curved 2 x 2 x 2/3

×3

Slope, Curved 2 x 2 x 2/3

Road Sign 2 x 2 Square with Open O Clip with Curved Blue Lines and Small Black Squares Pattern (Computer Screen)

Technic, Pin Connector 3L with 2 Pins and Center Hole

×10

Helicopter Landing Ski 1 x 6 with Pin Hole {15625}

×12

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Plate, Modified 1 x 2 with 1 Stud with Groove and Bottom Stud Holder (Jumper)

×2

Tile, Modified 1 x 1 with Open O Clip

Plate, Modified 1 x 2 with Bar Handles on Ends

×2

Arch 1 x 3 x 2 Inverted

×2

Bracket 3 x 2 x 1 1/3 with Bottom Tube

×6

Minifigure, Utensil Ice Axe - 3-Rib Handle

×3

Plate, Round Corner 2 x 6 Double

Minifigure, Utensil Radio (Walkie-Talkie) with Detailed Grille

Brick, Modified 1 x 2 x 1 2/3 with Studs on Side

×2

Technic, Axle and Pin Connector Hub with 1L Axle

×2

Panel 1 x 2 x 1 with Rounded Corners and 2 Sides

×8

Tile, Modified 1 x 2 Grille with Bottom Groove

×8

Tile, Modified 1 x 2 Grille with Bottom Groove

×6

Tile, Modified 1 x 2 Grille with Bottom Groove

×17

Tile 1 x 4

×5

Tile 1 x 4

×6

Tile, Modified 1 x 2 with Bar Handle

×2

Windscreen 3 x 4 x 1 1/3 with 2 Studs on Top

Plate 2 x 12

Brick 2 x 6

×6

Plate, Modified 1 x 2 with Long Tow Ball

×3

Plate, Modified 1 x 2 with Bar Handle on Side - Free Ends

×6

Plate, Round 1 x 1 with Bar Handle

Technic, Pin with Short Friction Ridges

×19

Plate, Modified 2 x 2 with Pin Holes

×4

Brick, Modified 1 x 2 with Grille / Fluted Profile

×2

Brick 2 x 4

×4

Brick 2 x 4

×3

Brick 2 x 4

Brick 2 x 3

×2

Brick 2 x 2

Wedge, Plate 8 x 6 x 2/3 with Grille

Brick 1 x 2

×8

Brick 1 x 2

×4

Brick 1 x 1

×2

Brick 1 x 1

×10

Minifigure, Utensil Camera Handheld Style with Extended Bar Handle

Brick 1 x 6

×3

Brick 1 x 4

×3

Brick 1 x 4

×5

Container, Crate 3 x 4 x 1 2/3 with Handholds

×2

Plate, Modified 2 x 4 with Pins and Thin Angled Supports

×4

Minifigure, Utensil Tool Circular Blade Saw

×2

Plate 2 x 4

×2

Plate 2 x 4

×2

Plate 2 x 3

×2

Plate 2 x 2

×3

Plate 2 x 2

×15

Minifigure, Utensil Tool Motor Hammer / Jackhammer

Plate 1 x 2

×3

Plate 1 x 2

×3

Plate 1 x 2

×5

Plate 1 x 2

×2

Plate 1 x 2

×11

Plate 4 x 6

Plate 2 x 8

×2

Wedge, Plate 12 x 6 Left

Wedge, Plate 12 x 6 Right

Plate 6 x 8

×3

Bar 4L (Lightsaber Blade / Wand)

×3

Slope 45 2 x 2

Hook with Tow Ball

Slope 45 2 x 2 with Radar and Disk Slot Pattern

Slope 45 2 x 1

×8

Slope 45 2 x 1

×2

Panel 1 x 4 x 1

×2

Slope 45 2 x 2 Double Convex Corner

×2

Brick, Modified 1 x 2 with Pins

Brick, Round 1 x 1

×4

Tile 2 x 2

×6

Tile 2 x 2

Tile 1 x 2

×4

Tile 1 x 2

×2

Tile 1 x 2

×2

Tile 1 x 2 with Red 82, Yellow and White Gauges Pattern

×3

Technic, Brick 1 x 2 with Holes

×4

Technic, Brick 1 x 14 with Holes

×2

Plate, Modified 1 x 2 with Door Rail

×2

Technic, Axle 2L Notched

Technic, Brick 1 x 2 with Axle Hole

×2

Technic, Axle 5L

Technic, Gear 12 Tooth Double Bevel

×4

Technic, Liftarm Thin 1 x 4 - Axle Holes

×4

Brick 1 x 2 x 2 with Inside Stud Holder

×6

Technic, Liftarm Thick 1 x 7

Technic, Liftarm Thick 1 x 11

×2

Technic, Pin Connector Perpendicular Double 3L

×2

Technic, Gear Worm Screw, Long, Axle Opening Type II

Slope 33 3 x 4

Plate 1 x 8

×2

Plate 1 x 8

×6

Fence 1 x 4 x 1 Lattice

×2

Technic, Gear 24 Tooth with 1 Axle Hole

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×6

Slope, Inverted 45 2 x 2 with Flat Bottom Pin

×8

Plate 1 x 6

×4

Plate 1 x 6

×4

Slope, Inverted 45 2 x 2 Double Convex

×2

Turntable 2 x 2 Plate, Top

Turntable 2 x 2 Plate, Base

Slope 75 2 x 2 x 3 - Solid Studs

×4

Technic, Brick 1 x 2 with Hole

Technic, Brick 1 x 8 with Holes

×2

Technic, Axle 4L

×2

Plate 1 x 4

×2

Plate 1 x 4

×4

Technic, Link Chain

×13

Technic, Axle 1L with Pin without Friction Ridges with Round Hole

×10

Technic Circular Saw Blade 9 x 9 with Frictionless Axle Hole and Teeth in Alternating Directions

Motorcycle Chassis, Snowmobile

Plate 2 x 6

×5

Plate 2 x 6

×2

Plate 2 x 6

×6

Vehicle, Steering Stand 1 x 2 with Black Steering Wheel

×2

Plate 2 x 10

×2

Technic, Brick 1 x 6 with Holes

×2

Technic, Brick 1 x 12 with Holes

×2

Minifigure, Utensil Cup

×2

Plate 6 x 6

×2

Dinosaur Tail / Neck Middle Section with Bar Hole and Technic Pin

×2

Dinosaur Tail End Section / Horn

×2

Plate, Round 1 x 1

×5

Minifigure, Utensil Seat / Chair 2 x 2

Hinge Cylinder 1 x 3 Locking with 1 Finger and Pin with Round Hole and Friction Ridges on Ends

×4

Tile 1 x 8

×2

Tile 1 x 8

×7

Wedge, Plate 4 x 2 Right

×3

Wedge, Plate 4 x 2 Left

×3

Door 1 x 4 x 5 Train Left, Thin Support at Bottom

Glass for Train Door with Lip on Top and Bottom

Technic Bush 1/2 Smooth

×4

Slope 33 3 x 1

×14

Slope 33 3 x 1

×2

Wedge, Plate 4 x 4

×2

Dish 3 x 3 Inverted (Radar)

Technic, Axle 7L

Hinge Plate 1 x 2 Locking with 1 Finger on End without Bottom Groove

×2

Hinge Plate 1 x 2 Locking with 2 Fingers on End

×4

Bracket 1 x 2 - 2 x 2

×5

Bracket 1 x 2 - 2 x 2

×5

Plate 1 x 10

×2

Plate 1 x 10

×2

Technic, Axle 3L

Wedge 4 x 4 x 2/3 Triple Curved

Plate, Modified 1 x 4 Offset

Antenna Small Base with Black Lever (4592 / 4593)

×3

Minifigure, Visor Snow Goggles

Slope, Curved 2 x 2 x 2/3 with 2 Studs and Curved Sides

×4

Rock Panel 2 x 4 x 6

×4

Plate, Modified 1 x 2 with Bar Handle on Side - Closed Ends

×3

Panel 1 x 2 x 1 with Rounded Corners

×2

Bar 1L with Clip Mechanical Claw - Cut Edges and Hole on Side

×2

Plate, Modified 1 x 1 with Tooth Horizontal

Motorcycle Fairing, Dirt Bike

Wedge 4 x 6 x 2/3 Triple Curved

Slope 30 1 x 1 x 2/3

×3

Slope 30 1 x 1 x 2/3

×4

Slope 30 1 x 1 x 2/3

×2

Slope 30 1 x 1 x 2/3

×5

Tire 56 x 26 Balloon

×10

Wheel 30.4mm D. x 20mm with No Pin Holes and Reinforced Rim

×10

Technic, Steering Arm 6 x 2 with Tow Ball Socket Rounded, Chamfered

Crane Arm Outside, Wide with Pin Hole at Mid-Point

Window 1 x 2 x 2 Plane, Single Hole Top and Bottom for Glass

×9

Sticker Sheet for Set 60195 - (38874/6227896)

Plate, Modified 1 x 2 with 2 Open O Clips (Horizontal Grip)

Hinge Plate 1 x 2 Locking with 2 Fingers on Side

×2

Plate, Round 4 x 4 with Hole

Brick, Modified 1 x 1 with Open O Clip (Vertical Grip) - Hollow Stud

×2

Slope 18 4 x 1

×2

Slope 18 4 x 1

×2

Plate, Modified 1 x 2 with Bar Handle on End

×6

Slope 65 2 x 1 x 2

×6

Glass for Window 1 x 2 x 2 Flat Front

×17

Wedge, Plate 6 x 6 Cut Corner

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×2

Plate, Modified 1 x 1 with Open O Clip (Horizontal Grip)

×4

Window 1 x 4 x 2 Plane, Single Top Hole and Single Bottom Hole for Glass

×4

Turntable 4 x 4 Square Base, Locking

Technic, Pin Connector Round 2L with Slot (Pin Joiner Round)

×10

Plate, Modified 2 x 2 with Tow Ball Socket, Short, Flattened with Holes and Axle Hole in Center

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

×6

Plate, Modified 1 x 2 with Clip on End (Horizontal Grip)

Bar 6L with Stop Ring

Minifigure, Utensil Telescope

Technic, Pin 3L with Friction Ridges

×10

Technic, Gearbox 2 x 4 x 3 1/3

Tile 1 x 6

×2

Tile 1 x 6

×2

Tile 1 x 6

×3

Tile 1 x 6

×6

Tile, Round 2 x 2 with Lifting Ring Thick and Bottom Stud Holder

Bracket 5 x 2 x 2 1/3 with 2 Holes and Bottom Stud Holder

Windscreen 3 x 4 x 3

Slope 30 1 x 2 x 2/3

×4

Tile 2 x 4

×4

Tile 2 x 4

×2

Brick, Round 4 x 4 with Hole

Plate, Modified 2 x 2 with Groove and 1 Stud in Center (Jumper)

×2

Plate, Modified 2 x 6 x 2/3 with 4 Studs on Side

Arch 1 x 3 x 2 with Curved End

×8

Tile, Modified 3 x 4 with 4 Studs in Center

×2

Window 2 x 8 x 2 Boat

×4

Glass for Window 2 x 8 x 2 Boat

×4

Plate, Modified 1 x 2 with Clip with Center Cut on Top

×2

Plate, Modified 1 x 4 with 2 Studs without Groove

×4

Plate, Modified 1 x 4 with 2 Studs without Groove

Bone, Short

×2

Slope, Curved 4 x 1 x 2/3 Double

Slope, Curved 4 x 2

Arm Skeleton, Bent with Clips (Horizontal Grip)

×5

Brick and Axle Separator

Tile, Round 1 x 1

×8

Tile, Round 1 x 1

×5

Plate, Modified 1 x 4 with Tow Ball Socket, Flattened with Holes

×2

Minifigure, Utensil Ski without Hinge

Bracket 1 x 2 - 1 x 2 Inverted

×3

Bracket 1 x 2 - 1 x 2

×4

Mammoth / Elephant Trunk

Mammoth Body with Dark Brown Rotation Joint Socket

Mammoth Head with Black Rotation Joint Pin with Black Eyes with White Pupils Pattern

Arctic Mobile Exploration Base

About Arctic Mobile Exploration Base

Part-out value

Seller notes

Minifigures in Arctic Mobile Exploration Base (6)

Parts (242)

Common questions about Arctic Mobile Exploration Base

How much is LEGO Arctic Mobile Exploration Base (60195-1) worth?

What minifigures come in LEGO set 60195-1?

Is it worth parting out LEGO Arctic Mobile Exploration Base?

Is LEGO Arctic Mobile Exploration Base (60195-1) retired?

How do I check if my Arctic Mobile Exploration Base set is complete?

More Town / City sets

Explore more

Company

Legal